• + Expand All
  • - Close All
  • Backfill Blade
    Backfill Blade U.S Metric Blade width 80 in 2030 mm Blade height 14 in 355 mm Lift height above ground 25.2 in 640 mm Blade drop below ground 10.9 in 276 mm Swing angle, max Left/right 30° Tilt angle Up/down 16°
  • Noise Level
    Noise Level U.S Metric Operator 92 dBA sound pressure per ISO 6394
  • Ease of Use
    RT80 Quad
    Ease of Use

    Removable side panels provide easy access to all engine compartment maintenance points.

  • Power
    RT80 Quad
    Power

    Turbocharged Deutz® Tier 4 diesel engine with 74 gross hp (55.4 kW) and a compact footprint enable the RT80 Quad to do big jobs in small places. A Tier 4i engine is also available in less regulated countries.

  • Hydraulic System @ 2,500 RPM (Tier 4)
    Hydraulic System @ 2,500 RPM (Tier 4) U.S Metric Ground drive pump capacity 35 gpm 132 l/min Ground drive pump and pressure Forward/reverse 6,000 psi delta 380 bar Attachment pump capacity 33 gpm 125 l/min Attachment pump and relief pressure Forward/reverse 5,500 psi 380 bar Auxiliary pump capacity Front pump 7.1 gpm 27 l/min Rear pump 6.2 gpm 23 l/min Auxiliary pump relief pressure 3,000 psi 207 bar
  • Superior Support
    RT80 Quad
    Superior Support

    Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.

  • Fluid Capacities
    Fluid Capacities U.S Metric Fuel tank 30 gal 114 L Engine oil 8.4 qt 8 L Hydraulic reservoir 12 gal 45 L Hydraulic system 19 gal 72 L
  • Power Train
    Power Train U.S Metric Ground drive transmission Hydrostatic Differentials Planetary front and rear w/standard rear steering Parking brake Manual lever disc brake Tracks 450 x 86 x 36, rubber track, chevron pattern Attachment drive transmission Hydrostatic, electric rotary knob, speed infinitely variable from zero to maximum
  • Battery
    Battery U.S Metric Group 78U SAE reserve capacity rating 110 min SAE cold crank @ 0°F (-18°C) 800 amps Auxiliary power outlet 12V, 10 amps Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.
  • Rugged Design
    RT80 Quad
    Rugged Design

    Backfill blade arm has the same heavy-duty design as the Ditch Witch RT115 Quad, for added strength and durability.

    Electronic potentiometers give the operator precise control of the ground drive speed and attachments.

  • Operation
    Operation U.S Metric Forward speed Low 1.5 mph 2.4 km/h Medium 3.3 mph 5.2 km/h High 4.7 mph 7.5 km/h Reverse speed Low 1.1 mph 1.7 km/h Medium 2.5 mph 4 km/h High 2.7 mph 4.3 km/h Vehicle clearance circle (SAE) wall to wall w/backfill blade Front steer only 33.5 ft 10.2 m Front and rear steer 21.5 ft 6.5 m Ground clearance 15.3 ft 387 mm Basic unit weight 11,580 lb 5253 kg Allowable tractor weight, max, 2 post 19,100 lb 8864 kg Allowable tractor weight, max, 4 post 20,370 lb 9240 kg Front counterweight (optional) 1,650 lb 750 kg
  • Dimensions
    Dimensions U.S Metric Height 103 in 2616 mm Nose to rear mount length 112.3 in 2852 mm Length, transport 139 in 3530 mm Wheelbase 63 in 1600 mm Width 90 in 2286 mm Angle of approach 31° Thread 72 in 1829 mm Rear axle to attachment mount holes 16.8 in 427 mm
  • Power (Tier 4)
    Power (Tier 4) U.S Metric Engine TD3.6L4 Fuel Diesel Cooling medium Liquid Injection Direct Aspiration Turbocharged Number of cylinders 4 Displacement 221 in3 3.6 L Bore 3.86 in 98 mm Stroke 4.72 in 120 mm Engine manufacturer's gross power rating (SAE J1995) 74 hp 55.4 kW Rated speed 2,500 rpm Emissions compliance—highly regulated countries EPA Tier 4 EU Stage IIIB Emissions compliance—less regulated countries EPA Tier 4i EU Stage IIIA
  • Productivity
    RT80 Quad
    Productivity

    Tremendous axle capacity for a best-in-class static load rating of 39,000 lb (17,690 kg) and best-in-class 35,215 lb (13,944 kg) of breakout for plowing applications.

    Three-speed, shift-on-the-fly ground drive is superior to competitors’ two-speed ground drives, giving you more options as jobsite conditions and requirements change.

    Standard rear steering feature gives the RT80 Quad a tighter turn radius and better maneuverability on tight jobsites, while our innovative chevron-pattern tread puts more power on the ground for maximum productivity.

    Whether you're plowing or trenching, standard cruise control enables you to maintain optimal performance in many ground conditions.